Expert Answers about Keystone Fuzion TT Toy Hauler

• LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen For 2010 Keystone Fuzion TT Toy Hauler
• Yes, the LaSalle Bristol CrossBreeze Screen, # 3441409775PBK is attached to the inside wall of your toy hauler. The inside-wall-to-inside-wall measurement is what is crucial for fitment. For your RV, you provided a measurement of 98-1/2" so the 97-3/4" wide, # 3441409775PBK is what you will need. There is not an option to disassemble and cut width for fitment. When installing, you will need to fit within the walls of your RV and build-up the gap by using spacers, running a strip of lumber...
  view full answer...


• Options for Lifting a Triple Axle Trailer with Over Slung Axles
• From what I could find on the 2010 Keystone Fuzion Toy Hauler 405, it has 7,000 lb. ez lube triple axles that are already flipped. Given that information, the only thing that we would have is the Correct Track Trailer Alignment and Lift Kit # LC87120 (you would need one kit for each axle). This will provide you with 2-1/4" of lift. You can try lowering the pin box to try and make up the other 2" you are needing, but it sounds like you may be dealing with a lifted truck which can often...
  view full answer...


• Tow Bar Wiring Solution for Tow Vehicle with 4-Way Flat Connector at Rear of it
• So what you could do is use the coiled tow bar wiring kit from Blue Ox part # BX8861 at the rear of the fifth wheel that has a 4-way flat connector as this comes with a 4-way round connector that can replace it as well as another one for the front of your tow vehicle and coiled wiring to connect across the tow bar. Then for an easier to install invisible supplemental braking system the Demco SBS DUO part # SM99251 would work great. I don't know the year of your Chevy Spark for determining...
  view full answer...


• Replacement Follow Landing Gear Leg For 2009 Keystone Fuzion Toy Hauler
• From our research your 2009 Keystone Fuzion travel trailer has Venture landing gear on it from the manufacturer. You should be able to use the Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear part # LG-179014 to replace your follow leg but you want to make sure your leg measures 29-1/2". Since you cannot get to the landing gear, if you can find a brand of the landing gear it would be very helpful.
  view full answer...